[China Glass Net] The glass brick wall is actually well understood, that is, a wall designed by glass. Usually, the wall is widely used in various high-end places, and the glass brick is divided into two types: hollow and solid. Although it is a wall, it does not have the weight-bearing function of the wall, but it has some other functions of the wall, and it is more beautiful. Let us understand the advantages of the glass brick wall and the technical specifications of the construction glass brick wall.
Advantages of glass brick walls
1. Energy saving and environmental protection are reasonable
The local materials used in the glass brick wall are usually not mixed with harmful substances, and there are some radioactive materials possessed by ceramic stone, which are non-toxic, harmless, non-polluting, odorless, non-irritating and do not cause any damage to the human body. Glass bricks have many advantages. The rare thing is that the price is not expensive. The material plus construction is based on the current price level. The glass brick structure is about 300 yuan, which is not expensive compared with other decorative materials.
2, light insulation
The material has the advantage that many materials are not available, and therefore it will have poor performance. For example, the glass brick has the characteristics of high light-emitting performance, and it can also make the light diffuse through the diffuse light to make the whole room full of soft light. Solved the discomfort caused by direct sunlight. The single-layer glass brick structure can meet the requirements of sound insulation level 5, and the double-glazed brick wall with the spacing less than 50mm can meet the requirements of sound insulation level 6. As a penetrating sound-insulating material, good noise insulation can be achieved whether it is used on noisy roads or around the factory.
3, dust, moisture, anti-condensation
There is also the advantage of the three aspects of the glass brick, which is better than the ordinary double-layer glass, and the glass brick can also play an excellent role in preventing atomization. For example, in the case of an indoor temperature of 20 degrees Celsius and a humidity of 60%, the outdoor temperature does not atomize even at minus 2 degrees Celsius, because of the heat insulation performance, energy conservation, and a refreshing atmosphere due to non-atomization.
Process specification for construction glass brick wall
One: construction process
1. Preparation of materials before construction: glass brick, cement, sand, admixture, steel, silk felt, channel steel, metal profile frame, etc.
2. Mix white cement, fine sand, construction glue and water in a ratio of 10:10:0.3:3 to form a mortar.
3. Install the "+" or "T" type positioning bracket.
4, using mortar to build glass bricks, from bottom to top, layer by layer.
5. After the completion of the installation = remove the excess plate on the positioning bracket.
6. Use a greasy knife to sew and remove excess mortar.
7. Wipe the mortar on the glass bricks with a damp rag in time.
Two: construction acceptance criteria
1. The type, performance, pattern and color of the glass brick used must meet the requirements.
2. The product needs to have a certificate of conformity and a certificate of product quality.
3. The tie-bars embedded in the masonry of the partition wall should be firmly connected and correctly positioned in the structure of the body.
4, the masonry should be firm, the end components and adhesive should be firm.
5, the surface should be consistent in color, beautiful, flat and clear.
6. The partition wall is horizontal and vertical, and the glass brick has no cracks or defects.
7. It also checks the verticality, surface flatness, joint height difference, seam straightness, and square rule.
Hat Series,Knit Cap,Wool Knit Beanie,Knit Beanie
JINGJIANG SHIJIA INTERNATIONAL TRADING CO.,LTD , https://www.jjsjinternational.com