Making a jewellery watch is a high challenge to the watch and jewellery process. If there is no challenge, it is not a good thing. If there is no challenge, there is no value. A really good jewellery watch, the difficulty of making it is the same as the final rendering.
A really good jewellery watch, the difficulty of making it is the same as the final result, which we did not expect as a guest. If a high-end jewellery watch, its craftsmanship and effects are in your expectation, it can only be said that this watch has not yet achieved the ultimate real jewellery watch, and the difficulty of its production is the same as that of the final presentation. We are all unexpected as guests.
Jewelry watch
Material and level
To judge the pros and cons of a jewelry watch, we must first look at its material. Because it is also a watch, the ordinary mechanical watch and the jewelry watch have a big difference. The ordinary mechanical watch is performance-oriented, and the jewelry watch is Fancy the material. Therefore, to see the quality of the mechanical watch, we must first understand the function and quality of the movement, and the jewelry watch depends on whether its material is good enough. The precious materials used in the jewellery watch, including gold, diamonds, precious stones, mother-of-pearl, etc., are all non-renewable resources that nature has nurtured. In addition to giving people the most intuitive beauty, its value is enduring.
Therefore, the diamonds used in the watch, each table size, thickness, cutting angle must strictly adhere to the standard, because if the diamond is not adjusted, it will affect the structure of the entire table, the dial may be deformed, the pointer may not operate correctly... The diamonds used in jewelry can be adjusted by hand without affecting the beauty of the jewelry. In addition, the diamonds used in the watch are generally arranged very neatly. It can be seen at a glance. The diamonds in the jewelry are different. Even if there is a small flaw, it is seen from different angles. Not coming out. Therefore, the watch must be used in the top of the diamond. The average standard is: the color must be above the G color, the clarity is above VVS1, and the cut is at least the Very Good level.
Gemstone usage
In addition to the specifications, the overall number of jewels inlaid with jewels is also important. People who often buy high-end jewellery often form a fixed concept that the price of a fine jewellery is mainly determined by the size and color of its main stone, rather than the group of diamonds.
It should be said that this concept is not fully applicable to jewelry watches. First of all, 99% of the jewellery watches have no concept of the main stone, only the group of diamonds; secondly, the group of diamonds are not large even though they are taken out, but its value is not low. In addition to the factors of good color, it is also determined by the particularity of the processing of gemstones.
There is a particularly interesting phenomenon in the gem industry, that is, the same size of stone, the more you buy, the more expensive it is, and the more difficult it is to match. You buy things in other industries, such as buying shoes, buying a pair is a price, buying 10,000 pairs is definitely cheap, because mass production dilutes the cost; you have to go to the wholesale market to buy, a pair of shoes may not be sold. But the gem industry is not like this. As long as you have certain requirements on the shape and specifications, you want a batch of identical diamonds, and its price is definitely high. Because natural gemstones are difficult to be completely suitable, they have to go from big to small, and it is impossible to grow from small to large. If the price of the raw material (original stone) itself is relatively fixed, and the specifications are not pursued, it is definitely the cheapest to go with the shape.
If you are pursuing the specifications, as long as the amount is small, you can try to find some rough stones that are closer to each other. The yield is high and the price is acceptable. The most fear is that both the specifications and the large amount of demand can only be used to cut the original stone from the big to the small, and cut the big raw materials to meet the needs. Such prices will soar, and even a zero, which is ten times the price difference, is difficult for people outside the industry to understand.
In addition, the more special the shape of the jewels used on the jewellery table - such as the diamond and emerald cut diamonds set on the bezel and chain, the higher the cost. And you have to wait, it won't be there soon. The gems are made by God. It is not artificial. You have to find the rough stone that is almost suitable in shape, otherwise it will become a violent thing.
Inlaid craft & ultimate pursuit
With the ready-made gems, the test is the skill of the gem-setter in the watchmaking system. Limited by the structure of the watch itself: its metal part is thinner than jewels, and the 18K gold itself is relatively soft, and it is deformed with a little force, so the same setting method is used in the watch to raise the level of difficulty in the jewelry. Whether it is the more common nail setting or the cumbersome snow setting and hidden setting.
The gemstone inlay on the jewellery table, the most common one is micro-studded – look to see it as a very small and very precise claw setting that requires a 20x microscope. Each gemstone has a thickness. In order to be inlaid on a metal structure that is only one or two millimeters thick, it is necessary to hold the diamond with a very fine nail. It has to have a good fire color, and it takes a lot of effort to use it. Language to describe. If you have the chance to try it, you know that under the high power microscope, don't say that the diamond is set on the watch. As long as the hand moves a little, the refracted light will be dizzy, exactly the same as the motion sickness. Therefore, only those who are particularly quiet can be competent, and those who are not calm can't do it.
In France and Switzerland in Europe, the masters of jewelry are inlaid with masters. They have been inlaid with gemstones for a lifetime, and the craftsmanship has been in full swing. On the other hand, there are many factories in China that do high-quality jewellery, but there are few high-end jewellery watches, because it is more difficult, and people who are not calm, give up for a while, and never reach that realm.
In the early years, Dr. Ren Jin designed a super-thin table with diamonds for himself, and found a Piaget 9P movement inside. However, it was troublesome in the diamond-stitching process because At that time, in the domestic jewelry industry, there was no way to find a master who could make diamonds on such a thin 18K gold dial. In the end, there is really no way, you can only "break the game", using the laser spot welding machine in the jewelry industry to "sew" the diamonds one by one on the dial. Although the diamond is "inlaid", the dial can not be taken out. It is.
The above four elements can be described by qualitative or quantitative, and the true and most valuable part is unqualified, that is, the pursuit of the ultimate. For example, to achieve a designer's design concept, you need to match the most vivid color combinations from thousands of gems; you need to use the rare materials or craftsmanship in the watchmaking world; you need jewelers to fight for hundreds of hours. No flashing can occur during the entire inlay process; even a special movement should be developed to match it.
There are of course many jewel inlays in the jewellery table, but none of them are easy. It is a 0.5-carat and 1-carat gemstone set on the dial of the giants. It can't rotate if it's too light. It's too heavy and difficult to control the thickness. It's as small as a 0.001-carat micro-drill set on the pointer. The length is only 0.2 mm, and it is also gripped with metal claws... These inlays are even more demanding for hand-made than even the assembly of complex menus and the grinding of the movement.
"4C" identification
Anyone who has had contact with diamonds and jewelry must know the quality standard of “4Câ€. Whether it is a large drill, a small drill, a main drill or a diamond, the “4C†standard can be used to determine its value. “4C†includes the color, clarity, weight and cut of the diamond. If you say a gem-quality diamond, then it should be colorless and transparent, so that it can be guaranteed to be flawless or rarely flawed. It is also said in front that the watch must be used in the top of the diamond. The average standard is: the color must be above the G color (near colorless), the clarity is above VVS1, and the cut is at least the Very Good level. For the Patek Philippe, Rolex, and Audemars Piguet's watch factories, the level of diamonds required is even higher, and the clarity must be IF (absolutely flawless).
It can be said that making a jewellery watch itself is a supreme challenge to the watch and jewellery craft. If there is no challenge, it is not a good thing. If there is no challenge, there is no value. A really good jewellery watch, the difficulty of making it is the same as the final result, which we did not expect as a guest. If a high-end jewellery watch, its craftsmanship and effects are in your expectation, it can only be said that this watch has not yet achieved the ultimate.
Peva Shower Curtain Liner, Shower Curtain With Hooks.PEVA is an environmental protection material. It is odorless, smooth and has a good feel. The amount of EVA determines its feel and sag. The higher the EVA content, the better and heavier the sag
Material:PEVA
Size (m):1.8×1.8,1.78×1.83 and so on
Brand name:shangyou
Color:Any color and printing patterns
Weight:Customized
Place of origin:Jiangsu China
Feature:
1. Waterproof, oilproof, heat resistant, wear resistant, non toxic, durable.
2. Hang down naturally, will not wrinkle, no fading
3. Can replace the cotton, fibre or lace tablecloth which are difficult to clean and expensive.
4. Hundreds of attractive designs for your selection.
Packing:pvc bags or other requested
Applied range:Home,hotel and so on
Port of loading:Shanghai port ,Ningbo port
Payment terms:T/T ,L/C
Delivery time:45days
MOQ:3000pcs
Pe/Peva Shower Liner,Peva Shower Curtain Liner,Kmart Shower Curtain Liner,Shower Curtain With Hooks
Jiangyin Shangyou Plastic Co.,Ltd. , https://www.shangyouplastic.com